Edit Device #

To start Edit and configure the device, the user selects Manage > Devices

Click on Edit of that device, the following dialog box will appear:

1. Basic #

• Device information:

  • IMEI: Device identification number. (No editing allowed).

  • Account: Your username/username. (No editing allowed).

  • Icon: Click on the box right below to select the icon of the vehicle/vehicle in which you install the device.

  • SIM number: Enter the phone number you are using.

  • Activate: Account activation on/off status.

  • Device name: The device name can be changed to make it easy to remember and easy to see.

  • Device type: Select the device type name that corresponds to the device you are using.

  • Device group: A group of devices that have something in common in an account.

    

    • Step 1: Click on to add a device group.

    • Step 2: Select the account you want to add the device group to. Enter the device group name.

    • Step 3: Click Add to complete the operation.

      In addition, it is possible to create more device groups by as shown below:

      

      See more details here

    • SIM type: Select the SIM type that corresponds to the carrier of the phone number.

• Services

  • Service package : Device service pack in use (Not allowed to edit).
  • Time to : Term of service pack (Not allowed to edit).

• Warranty
  • Time from: Warranty activation date.
  • Time to: Warranty expiration date.

• Notes
  • Odometer (km) : When the car runs at the end of the day, it will automatically calculate the total distance that the car has traveled from before to yesterday.
    • If corrected to a different number, it will add from that number the number of kilometers traveled since that time of correction.
  • Notes : Type a note if you want to annotate something.

• SIM
  • Check CCID : If on and the device changes SIM, the system will automatically lock the account (can only be turned on/off when the account has permission).
  • CCID Origin : The first CCID SIM number assigned to the device.
  • CCID : Current CCID SIM number.
  • SIM number : Sim number of the device (can hide or show SIM number).
  • Updated date : The update date changes the device’s SIM.

• Sell info
  • SOLD : When the device has been sold to a stock account, it will automatically turn on. If not, it will be in off mode.
  • Sell date : Set the device sale date to another account (if applicable).
  • Updated time : The system automatically updates the device sale date when there is a change.

2. Advanced #

Vehicle information #

• License plate : Variable number of vehicles on which the navigation device is installed. The number plate must be entered in the correct format: Instant writing, including both letters and numbers, it will be displayed on the Directorate for Roads.

• VIN number : The chassis number consists of 17 characters. (For cars).

• Distance factor : Is the distance in kilometers in 1 vector unit. By default, the distance factor is 1.0.

• Frame number : The vehicle identification number. A series of serial numbers and letters are chiseled into the chassis. (For motorcycles).

• Engine number : Your vehicle’s engine number. (For motorcycles).

• Driver: The name of the driver of the vehicle/vehicle installed with the navigation device. If you don’t have it, click

  
  • Account : The account name you want to add a driver to.
  • Name : Name of the driver installing the device.
  • Phone number : Driver’s phone number.
  • License number : Driving license class.
  • Begin date : Driver’s license date.
  • Expired date : Expiration date of driving license.
  • Code : Driver’s license code.
  • Email : Driver’s email.
  • Address : Driver’s address.
  • Description : Describe more necessary information,…

Click Add to save the driver.

In addition, the driver can be added by as shown below:

See more details here

• Fuel
  • Consumption rate (Litre/100km) : Set the vehicle’s fuel consumption limit for how many liters per 100km.

• Advanced Features
  • Toll station : Can be turned on/off. When turned on when the vehicle passes through the toll booth, it will warn and correspond to the type of transport, it will calculate how much the vehicle will cost when passing.
  • Type of transport : Choose 1 of 5 types of transport. (Applicable in Vietnam only)

• Ministry of Transportation
  • Send data: Tick ​​on to send the device’s traffic data to the Directorate of Roads.
  • Province: Select a province to send data. (Selected only when sending mode is enabled).
  • Transport type QCVN: Choose one of the types of transport that is correct for the vehicle/vehicle in which you install the equipment. (Selectable only when sending mode is enabled).

3. Sensor #

• Before adding a new sensor, see the diagram below, how the parameters are sent from the gps device and how they need to be paired with the sensors.

• Click on Add sensor , the following dialog box will appear:

Basic #

• Step 1 : Click on Basic
  • Sensor name : Đặt biến cảm tên cho dễ nhớ, dễ nhìn.
  • Calculation method: Choose 1 of 3 methods: Calibration, Linear, Original.
  • Input: Select the corresponding parameter.
  • Sensor type : Select the sensor type corresponding to the unit of measurement.
  • Unit: Select the unit to measure.

• Step 2 : Click add to finish the operation.

Advanced #

• Step 1 : Click on Advanced
  • Increase minimum : Enter the sensor value that changes with abnormal increase.
  • Decrease minimum : Enter the sensor value that changes when an abnormal decrease occurs.
  • Offset : Enter “zero” when calculating the ADC to output the correct temperature (sensor type).
  • Round : How much do you round the sensor value after the sign (,).
  • Sort: Arrange the sensor value to change to any position.
  • Description : Can record more information about the sensor,…
  • Show map on map : Enable/disable to show/don’t show sensor name on map.

• Step 2 : Click add to finish the operation.

4. Camera #

Create camera #

• Step 1 : Click on Create camera

• Step 2 : Create Camera

  • Number plate: Device add camera.

  • Service package

    For service pack : Combo basic (2-4) or Combo plus (2-4) (Loại Basic)

    
    • Name : Enter the camera name according to the correct channel plugged in the recorder.
    • Type : Basic ( often ). Take pictures only.
    • Channel ID : Camera ID type ( 1-8 ).
    • Position : For vehicles that transmit data to the Ministry of Transport, it is mandatory to install cameras at the following 3 locations:
      Driver : Location visible to the driver, driver.
      Door : The position of passengers getting on and off the bus.
      Passenger : The location covers all passengers on the vehicle.
    • Description : Can enter more information about the camera,…
    • Replication : If you want to create multiple channels at the same time, choose clone, copy that channel. To save time and create channels faster. When cloning is successful, just select the channel number again.

    For service pack : Combo plus (2-4) (Type MDVR)

    
    • Name : Enter the camera name according to the correct channel plugged in the recorder.
    • Type : MDVR : In addition to taking photos, there is also a video recording feature.
    • MDVR Id : ID printed on SM400 device.
    • Host : IP address or domain name to access the camera server.
    • Port : Connector to the camera recorder. Default is 6605.
    • Channel ID : If the camera cable is plugged into the port of any channel, select that channel.
      The position of the mounting channel at the recorder, AV1 -> AV4. (For 8-channel recorders, -> AV8 ).
      Corresponding from CH1 -> CH8.
      Only 1 channel can be created.
      • Position : For vehicles that transmit data to the Ministry of Transport, it is mandatory to install cameras at the following 3 locations:
        Driver : Location visible to the driver, driver.
        Door : The position of passengers getting on and off the bus.
        Passenger : The location covers all passengers on the vehicle.
    • Description : Can enter more information about the camera,…
    • Replication : If you want to create multiple channels at the same time, choose clone, copy that channel. To save time and create channels faster. When cloning is successful, just select the channel number again.

• Step 3 : Click Add to save the camera.

❗ Note :

• The technical staff will configure the MDVR Id address, host, port for the device.
• The source account must have a score greater than or equal to total points needed to add a camera to add a camera!

5. Extension #

• Config
  • Timeout GPRS (minute) : The period of time after which the device does not update data after this period, the system considers the device as Lost.
  • Stop duration (second) : Is the amount of time that if the vehicle stops beyond this interval, it will be counted as 1 stop.
  • Engine input : Configure signal selection as Engine signal (Engine).
  • Radius stop (0-1000m) : Is the distance that when the vehicle stops, if the newly updated coordinates are beyond this distance, the system will update.
  • Min speed filter (km/h) : Is the speed value that when the device sends a speed lower than this value, the vehicle will be stopped.
  • Time zone: Select the time zone that matches the time zone in which the device is installed.

• Install signal
  • Tick to enable/disable device alerts to which you want to send alerts.
    Also can be quickly set Install signal here

• Alert
  • Speed ​​Exceeded: Tick and set the speed limit you want to send alert about.

After editing the information, click Save Changes to complete the operation.