Manage Send Command #

• Manage Send Command for the purpose of checking details of sent commands, creating commands to check the status, location,… of remote devices.

• To see the list of Send Command, click on Manage > Send command. The screen displays as shown below:

1. Create send command #

• Step 1: Click on Create send command.

• Step 2: A dialog box appears:

  • IMEI: Enter the IMEI list or select 1 or all devices in the list below the box if you need to send a command. Click Check:

    • All: Total IMEI number entered.
    • Normal: Total IMEI can send commands.
    • Error: The total number of IMEI errors with a description of the error cannot be sent.
      Chú ý: Error IMEi can be removed by clicking on Remove devices error
    
  • Device type: Select the device type that corresponds to the device selected above.
  • Command type: Displays the commands that the Device Type supports. Select command type to request execution.
  • Send command: Display command content sent command.

• Step 3 : Click Send to send the device command.

2. Search #

• Step 1 : You can search by the following 2 criteria:
  • Device name.
  • IMEI.

• Step 2:
  • Click Search: Will display the information you are looking for.
  • Click Reset : Will reset to default.

• Tick on Refresh after 10s if you want to refresh data after 10s.

3. Details #

• To see the details of sending orders, please click Details. The details dialog box appears.

4. Lock #

• In case you want to send an order but accidentally sent it but have not yet received a successful message, you want to stop that order and don’t want to send that order anymore, click here to block the order..

• Step 1 : Click on > Lock.

• Step 2:
  • Click OK: To lock the command.
  • Click Cancel: Will cancel the lock operation.

5. Resend #

• If you want to resend the command but don’t want to create it from scratch, do the following:
  • Step 1 : Click on > Resend of that sent command.
  • Step 2 : A dialog box appears
  • Step 3: Click Send to resend the order.