Location
The location needs to ensure good reception, less damage from external factors, metal shielding
4.1 Installing G400 with power cord set integrated RELAY
4.1.1 Steps for installation
Step 1 Insert Sim into the G400 device according to the instructions in section 3
Step 2 Connect the standard power cord set to the vehicle
- Black wire: Connect the negative pole on the battery
- Red wire: Connect the positive pole on the battery
- Yellow wire: Connect to RELAY to turn on/off the vehicle’s power supply
- Orange wire: Connect the vehicle’s electric lock signal wire, positive pole
Step 3 Connect the G400 device to a standard power cord
Step 4 Wrap the insulating tape & fix the G400 in place firmly with a lanyard
4.1.2 Installation wiring diagram
4.2 Installing G400 with the standard power cord set
4.2.1 Steps for installation
Step 1 Insert Sim into the G400 device according to the instructions in section 3
Step 2 Connect the power cord set power cord set integrated Relay to the vehicle
- Black wire: Connect the negative pole on the battery
- Red wire: Connect the positive pole on the battery
the padlock. - Green wire: Connect to the pin of the other end. The serial jack connects to the bottom of the padlock wire
Step 3 Connect the G400 device to a power cord-integrated Relay
Step 4 Wrap the insulating tape & fix the G400 in place firmly with a lanyard